|
These dot matrix impact printheads are designed to offer an outstanding performance,
with and without a heatsink.
Feature
• Light weight 36g/9pin
• Low power consumption
• Speed to 1,500Hz
| Specification | ADH-915
| ADH-915F | Max. Needle Frequency | 1,500Hz
| 1,500Hz | Number of copies | 1+3 | 1+3 | Life Expectancy
| 200million
| 200million
| Driver Type
| Constant voltage
| Constant voltage | Voltage Range
| 24V DC+-5%
| 24 DC+-5%
| Current Limit (Peak)
| 1.4A
| 1.4A
| Max. Coil Temp.
| 155°C | 155°C | Number of Print wires
| 9inline | 9inline
| Print wire Diameter
| 0.3mm (0.12") | 0.3mm (0.12") | Vertical Pitch
| 0.35mm (0.14") | 0.35mm (0.14") | Heatsink | Not standard
| Not Standard | Weight | Approx. 36g | Approx. 32g | Connector Type
| Flex circuit
| Flex circuit | Dimensions (mm) | 28 (W) x 37 (L) x 41 (H) | 26 (W) x387 (L) x 26 (H) |
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt arises form this products, please inform us immediately for technical consultation without fail. | |
|
